How to Recover a bad NAND Flash

From Alpha Archive Wiki
Revision as of 22:20, 5 September 2020 by Gunz4Hire (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Thanks to XJR9000

  1. Unplug power and video
  2. Plug in video
  3. Temporarily bridge Legs 44-47 on the NAND ( I used a plastic spudger with non melted solder pushing onto the pins)
  4. Plug in power (Make sure Power light on power supply is orange.
  5. Remove Temporary Bridge from pins.
  6. Write to nand
Retrieved from ‘http://wiki.alphaarchive.net/index.php?title=How_to_Recover_a_bad_NAND_Flash&oldid=1052’