Difference between revisions of "Medusa Kiosk Control Pack"
Jump to navigation
Jump to search
(Created page with "Bare Minimum to use Medusa: * Medusa Special Double Ended AV Cable (30 pins connected) * USB-A to USB-B Cable (plugged into back USB port of Xbox 360) * Power Supply Ports:...") |
|||
| Line 1: | Line 1: | ||
| + | {{ Template:InfoText | ||
| + | | filename= Medusa Front.jpg | ||
| + | | size= 400 | ||
| + | | launchd= Was used inside Kiosk Machines | ||
| + | | mfr= Microsoft | ||
| + | }} | ||
| + | |||
Bare Minimum to use Medusa: | Bare Minimum to use Medusa: | ||
Revision as of 03:42, 1 September 2020
|
|
| Medusa Kiosk Control Pack |
|---|
|
Launch Date: Was used inside Kiosk Machines |
Bare Minimum to use Medusa:
- Medusa Special Double Ended AV Cable (30 pins connected)
- USB-A to USB-B Cable (plugged into back USB port of Xbox 360)
- Power Supply
Ports:
- 2x USB wired Controller ports
- 2x mini-DIN connectors for Internal and External headphone jacks, with a headphone volume control on the Kiosk (2x 3,5mm TRS per player, 2 buttons (Vol + / Vol -)
- 1x Mini-USB port on the front used for a Special Memory Card slot on the Front of the Kiosk. (Uses 3.3v instead of 5v)
- 1 Power Port that uses a 5volt/5amp Power Supply
Features:
- Block access to Xbox LIVE
- Block access to settings
- Automates demo time (OFF/5MINS/10MINS/15MINS)
- Can access "Retailer Specific" images
Others: (Thanks Aspect for the specs)
- Powered by a PIC16F747-I/PT
- Internal debugging port at J5 connected to the debugging pins of the PIC
- A Programming port (RJ25 connector) accessible from the cover of the unit
- USB hub chip CY7C65640-LFXC takes care of the USB connectors for I/O, controllers, and the memory card
- ATMEL518 microcontroller near the USB hub that is possibly tied to timer functionality
