Difference between revisions of "How to Recover a bad NAND Flash"
Jump to navigation
Jump to search
(Created page with "Thanks to XJR9000 1. Unplug power and video 2. Plug in video 3. Temporarily bridge Legs 44-47 on the NAND ( I used a plastic spudger with non melted solder pushing onto the p...") |
(No difference)
|
Revision as of 23:20, 5 September 2020
Thanks to XJR9000
1. Unplug power and video 2. Plug in video 3. Temporarily bridge Legs 44-47 on the NAND ( I used a plastic spudger with non melted solder pushing onto the pins) 4. Plug in power (Make sure Power light on power supply is orange. 5. Remove Temporary Bridge from pins. 6. Write to nand
